Owner`s manual

25
Chapter 3
INT203 Technical Data
3.1 Digital Inputs
• (1) XLR connector
• (1) RCA connector
• all inputs accept professional or consumer standard, i.e. accept AES/EBU
or S/PDIF signals.
• Maximum input wordlength: 24 bits
• The unit has to be power cycled in order for any primary input selection
change to take effect (IN1 /IN2 )
• (2) Firewire connectors
3.2 Digital Outputs
• (1) XLR connector
• (1) RCA connector
• Professional Channel Status Data on the XLR and RCA outputs
• Single wire mode: stereo signal (channel 1/2) on all outputs (OUT1,
OUT2 ), at all sampling rates
• (2) Firewire connectors
3.3 Synchronization
• Sampling Frequencies: 44.1, 48, 88.2, 96, 176.4 or 192 kHz
• Synchronized via an input signal (external sync source XLR or RCA) or
the internal oscillator