Owner`s manual

the external device. In this case set the sampling rate as indicated by the

Measured Sampling Rate within Device Settings/General.

Sync Source

selects the clock to which the INT203 should sync to. For playback

this is usually the INT203’s Internal clock generator.

Operation Mode

determines the stability of the system. Try other modes if

clicks are encountered during playback.

Global Settings/Info Information about the driver version.

Device Settings/General

The device settings should be pretty self-explana-

tory.

Device Settings/Firmware Loader

Allows uploading new ﬁrmware to the

INT203. Not used for normal operation.