Owner`s manual

16
INT203’s output. Bit transparency means that the bits fed from the harddisk to
the INT203 are not changed in any manner.
2.1.8 Frontpanel
• Power switch
• Power/Bit Transparency Check LED
• Bit Transparency Check switch
• Infrared receiver (for optional remove control)
• 2 6-pin Firewire 400 sockets, which one is used does not matter
• Power socket for an external power supply
2.1.9 Backpanel
• IN1 /IN2 primary input select switch
• 1 XLR output connector: OUT1 stereo signal output (single wire mode)
• 1 RCA output connector: OUT2 carries the same stereo signal output as
OUT1
• 1 XLR input connector: IN1 stereo signal input (single wire mode)
• 1 RCA input connector: IN2 stereo signal input (single wire mode)
2.2 Installation
Carefully unpack the INT203. The following items should be enclosed:
• the INT203 Firewire I/O Interface unit
• a Power Supply
• a CD with the necessary Firewire drivers for Windows and OSX and with
the Bit Transparency check files.
• this Owner’s Manual
• a Certificate of Guarantee
• optionally: an IR Remote Control
2.2.1 Software installation
Perform the following installation procedure before connecting the INT203 to
the computer. The necessary files are supplied on the enclosed drivers CD.