Operating instructions

OPERATING INSTRUCTIONS FOR GAMBIT ADC2 24Bit / 192kHz A/D CONVERTER TECHNICAL DATA
Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 11
 [phone]  [phone]  http://www.weiss. ch [e-mail]
TECHNICAL DATA
Analogue Line Inputs
2 channels, symmetrical, not earth free, on two XLR female connectors, pin 2 hot.
Input Impedance > 5kOhm
Analogue Microphone Inputs
2 channels, symmetrical, not earth free, on two XLR female connectors, pin 2 hot.
Input Impedance > 5kOhm
48V phantom power switchable
AES/EBU Input
Input fs range: 44.1kHz
48.0kHz
88.2kHz
96.0kHz
176.4kHz
192.0kHz
All sampling frequencies must lie within +- 100ppm of the nominal sampling frequency.
Maximum Input Wordlength: 24 Bits
Connector: XLR female
Impedance: 110 Ohm
AES/EBU Output
Output fs range: 44.1kHz
48.0kHz
88.2kHz
96.0kHz
176.4kHz
192.0kHz
Maximum Output Wordlength: 24 Bits
Channel Status Data: Professional format
Connector: two times XLR male
Impedance: 110 Ohm
Format: single wire or double wire for fs higher than 48kHz
(switch selectable)