SDS
SAFETY DATA SHEET
Confirms to OSHA Hazard Communication Standard (CFR 29 1910.1200) HazCom 2012
Product:
REPAIR KIT For Wood Furniture and Floors- 511D
Revision Date: 10-Jan-2017
Document No.: 130529-5 Page 3 of 5
Release Date: 1/10/2014
Control Parameters
Exposure Guidelines:
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Ethanol (64-17-5)
1880 mg/m
3
Not available
Not available
1-Methoxy-2-propanol (107-98-2)
369 mg/m
3
Not available
Not available
Appropriate Engineering Controls
Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure limits.
Individual Protection Measures
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection must
be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected
respirator.
Skin and Body Protection: Wear suitable protective clothing.
Eye/Face Protection: Wear approved eye protection (properly fitted dust- or splash-proof chemical safety goggles) and
face protection (face shield).
General Work/Hygienic Practices: Handle in accordance with good industrial hygiene and safety practice.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Dark brown, mid brown, light brown, black, oak, maple, mahogany
Odor: Not determined
Odor threshold: Not determined
pH: Not determined
Melting point/freezing point: Not determined
Initial boiling point and boiling range: Not determined
Flash point: Not determined
Evaporation rate: Not determined
Flammability (solid, gas): Not determined
Upper/lower flammability or explosive limits: Not determined
Vapor pressure: Not determined
Vapor density: Not determined
Relative density: Not determined
Solubility(ies): Not determined
Partition coefficient (n-octanol/water): Not determined
Auto-ignition temperature: Not determined
Decomposition temperature: Not determined
Viscosity: Not determined
SECTION 10 – STABILITY AND REACTIVITY
Reactivity: Not reactive under normal conditions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: None under normal use.
Conditions to avoid: Open flames, hot surfaces and sources of ignition. Incompatible materials.
Incompatible materials: Strong acids. Strong oxidizing agents.
Hazardous decomposition products: May include and are not limited to: oxides of carbon. Carbon monoxide.
SECTION 11 - TOXICOLOGICAL INFORMATION





