User Guide

Part number 550-100-325/0718

AquaBalance

SERIES 2 WALL MOUNT GAS-FIRED WATER BOILER — Boiler Manual

Placing multiple boilers

1. Locate multiple boilers with spacings shown in Figure 53.

2. Provide indicated clearances around boilers for access and ser-

vicing. If recommended dimensions are not possible, provide

at least the minimum clearances given on page 5. Also follow

local codes.

3. Provide a minimum 36-inch walkway in front of the boilers to

ensure accessibility.

4. Unpack, assemble and mount boilers according to instructions

in this manual.

5. Provide clearance for installation of venting, air piping, gas pip-

ing, expansion tank, primary circulator and other accessories.

18 Multiple boiler installations

Figure 53 Side-to-side mounting of multiple boilers