Install Instructions

MAINTENANCE, DATE AND TIME menus

Figure 80 MAINTENANCE, DATE AND TIME menus — navigation (see Figure 66, page 70 for access information)

MAINTENANCE INFO

Use this section to enter contractor’s information, CP number, install date and to enter an automatic notice for maintenance (default is

12 months). Because this shows on the display, it is an automatic means of notifying the homeowner of need for scheduled maintenance

by the technician. Select RESET REMINDER to reset for the next maintenance date.

SET TIME AND DATE

Enter current date and time. This allows correct maintenance reminder timing and provides date and time stamp for lockout histories

on ERROR screen in Diagnostic Menu.

Maintenance Info

Comment

Name Contractor name to appear in maintenance reminders and during lockouts

Phone Contractor phone number

Model Displays the boiler model selected in the boiler setup

CP Number Enter the CP# of the boiler

Installed Enter the date the boiler was installed

Last Date Date automatically entered when Reset Reminder is chosen by contractor

Next Date Date automatically calculated when Reset Reminder is selected by contractor

Interval Settings Contractor selects maintenance reminder frequency based on service history

Reset Reminder

Contractor selects this to update Last maintenance Date and Next Date. Homeowner uses this to ignore the reminder and

update only the Next Date.

Set Time and Date

Year Set year (homeowner or contractor)

Month Set month (homeowner or contractor)

Day Set day (homeowner or contractor)

Hour Set hour (homeowner or contractor)

Minute Set minute (homeowner or contractor)

Part number 550-100-191/0917

gas-fired water boiler — 70/110/155 Boiler Manual