Advanced User Guide

52
CONDENSING GAS BOILER — Advanced Manual
™
MAINTENANCE, DATE AND TIME menus
Figure 33 MAINTENANCE, DATE AND TIME menus — navigation (see Figure 19, page 36 for access information)
MAINTENANCE INFO
1. Use this section to enter contractor’s information, CP number, install date and to enter an automatic notice for maintenance
(default is 12 months). Because this shows on the display, it is an automatic means of notifying the homeowner of need for
scheduled maintenance by the technician. Select RESET REMINDER to reset for the next maintenance date.
SET TIME AND DATE
1. Enter current date and time. This allows correct maintenance reminder timing and provides date and time stamp for lockout
histories on ERROR screen in Diagnostic Menu.
Maintenance Info Comments
Name Contractor name to appear in maintenance reminders and during lockouts
Phone Contractor phone number
-ODEL Displays the boiler model selected in the boiler setup
CP Number Enter the CP# of the boiler
Installed Enter the date the boiler was installed
Last Date Date automatically entered when Reset Reminder is chosen by contractor
Next Date Date automatically calculated when Reset Reminder is selected by contractor
Interval Settings Contractor selects maintenance reminder frequency based on service history
Reset Reminder Contractor selects this to update Last maintenance Date and Next Date. Homeowner uses this to ignore the reminder and update only the Next
Date.
Set Time and Date Comments
9E A R Set year (homeowner or contractor)
-ONTH Set month (homeowner or contractor)
Day Set day (homeowner or contractor)
Hour Set hour (homeowner or contractor)
-INUTE Set minute (homeowner or contractor)