User Guide

Part number 550-142-123/0513
11
Figure 7 ECO boiler control display USER Menu — (set date and time, reset faults).
The ECO control display (continued)
Date and time
1. Set month, date, year, hour and minutes.
2. Keeping the date and time current makes sure the
control can record problems accurately.
Figure 8 ECO boiler control display LOCKOUT SCREEN — screen turns red when boiler locks out —
highlight and select MANUAL RESET to reset boiler as shown below.
TM
gas-fired water boiler — User’s information Manual
Resetting faults:
1. During a fault, the status will change to LOCKOUT and the
Time & Date line will alternate with the fault name. The line
MANUAL RESET will appear on the Homeowner screen.
2. Select MANUAL RESET to reset fault condition.
3. The MANUAL RESET screen will indicate whether the fault
was a manual or automatic reset, the fault name, and the time
and date it occurred.
4. Call for service if fault continues.