Manual

9
USED FIREARMS - Firearms are sometimes altered to work incorrectly, or parts
may be removed, lost or replaced with incorrect parts. If you got your European
American Armory Corp. firearm as a used gun, BEFORE USING IT you should
take it to a good gunsmith who knows European American Armory Corp. firearms,
and have him examine it.
WRITE EUROPEAN AMERICAN ARMORY CORP. concerning any items or
circumstances which you don’t understand and which might relate to your safety
and the operation of your firearm at: European American Armory Corp., 3855
North U.S. Highway 1, Cocoa, Florida 32926 [phone].
W A R N I N G (POTENTIAL OBSTRUCTIONS)
BEFORE LOADING or firing a revolver, examine the bore and the firing chamber
to be certain they are clean and free of any obstruction. Even a heavy coat of oil,
grease, snow or water may result in damage to the firearm and injury to the
shooter and/or persons near the firearm. A misfire or unusual sound upon firing is
a signal to cease firing and to examine the chamber and bore. If there is any
obstruction, clear the obstruction and clean the bore and chamber before firing.
Any bore obstruction, even if it is only partly blocked, may cause the gun to blow
up if it is fired, or may cause damage to the gun such as a bulged barrel. To avoid
injury or death to the shooter or bystanders, check the barrel before shooting or
if a shot does not sound normal.
W A R N I N G
Always keep the muzzle pointed in a safe direction! Never attempt to load or
unload any firearm inside a vehicle, building or other confined space (except a
properly constructed shooting range). Enclosed areas frequently offer no
completely safe direction in which to point the firearm. If an accidental discharge
occurs, there is great risk of death, personal injury or property damage. Before
loading, always clean all, grease and oil from the bore and chamber, and check
to be certain that no obstruction is in the barrel. Any foreign matter in the barrel
could result in a bulged or burst barrel or other damage to the firearm and could
cause serious injury to the shooter or to others.
W A R N I N G
If there is any reason to suspect that a projectile or any other object is obstructing
the barrel, immediately unload the firearm (See Unloading Instructions) and check
the chamber and the bore. A wad, shot or some other matter that may be lodged
some distance down the barrel where it can not easily be seen. Check the bore
by using a cleaning rod to pass through the barrel. If a blockage is in the bore, DO
NOT ATTEMPT TO SHOOT IT OUT WITH ANOTHER CARTRIDGE, OR BLOW
IT OUT WITH A BLANK CARTRIDGE OR A CARTRIDGE FROM WHICH THE
SHOT HAS BEEN REMOVED. SUCH TECHNIQUE(S) CAN GENERATE
EXCESSIVE PRESSURE, DAMAGE THE FIREARM AND CAUSE SERIOUS
PERSONAL INJURY. If the blockage can be removed with a cleaning rod, clean