Manual

Use the Security Lock Provided with your Revolver

This revolver comes with a security lock to assist in

protecting against unauthorized use. See Figure 1.

The revolver must be unloaded when the security lock

is in place on the revolver. WARNING: Using the

security lock cannot substitute for securing your

firearm and ammunition in separate, locked locations.

Use either of the following two methods to install the

security lock provided with your Big Bore:

Method 1

1) Remove the provided security lock and block from

its package. See Figure 1.

2) Install the block on the

trigger (see Figure 2)

and then install the

security lock on the

security block. See

Figure 3. Next, close

the security lock. See

Figure 4.

Method 2

1) Looking at the trigger guard there is a hole in the

center bottom. See Figure 5.

2) Insert the lock through the hole and close the

lock. See Figures 6 and 7.

W A R N I N G

Always store the key to the

security lock: (1) in a

separate location away

from the revolver; (2) in a

secure location unknown

and not accessible to

others, especially children.

Whether you secure your firearms by using the supplied security lock, a gun lock

or safe or some other mechanism, it is YOUR RESPONSIBILITY to store your

firearms in such a manner that children and other unauthorized persons cannot

gain access to them.

Figure 1

Figure 3 Figure 4

Figure 5

Figure 6 Figure 7

Figure 2