Manual

Grip: The grip is that portion of the revolver used by
the shooter to grasp the revolver. See Figure 16.
The Serial Number: The revolver’s serial number is
located on the bottom front of the frame.
Front Sight/Rear Sight: The sights are located on
top of the barrel on the muzzle end and above and in
front of the hammer. See Figures 17 and 18.
Holster: A good quality, properly designed holster
should be used for safe carrying of your revolver. It
must be the correct size, and it should have a safety
flap or strap or other means of securing the revolver
so it cannot fall out.
W A R N I N G !
Do not carry the revolver cocked.
W A R N I N G !
Do not carry it in a pocket or tucked into a waistband
or belt or other informal means.
LOADING AND UNLOADING YOUR REVOLVER
W A R N I N G
Never load the revolver until you are ready to use it.
W A R N I N G
Make sure the revolver is pointed in a safe direction at all times while loading and
unloading. NEVER allow your fingers or other objects to contact the trigger while
loading or unloading.
*** Warning ***
Do not load the revolver until you are ready to fire.
TO LOAD:
1) Make sure the ammunition that you are using is the correct caliber. The
barrel is marked with the caliber of the cartridge.
2) Visually inspect the chambers and barrel for obstructions. The chambers
12
Figure 16
Figure 17
Figure 18