Data Sheet Shunts Class 0.5 60 mV 100 mV 150 mV 300 mV 800.D.101.
rated current ' Application Shunts provide an accurate DC millivolt signal to drive ammeter indicators, overload protection and control devices, especially for higher amperage. They supply a voltage drop proportional to the DC current which is measured and indicated by a moving–coil meter with the dial calibrated in amps. In accordance with DIN standard 43 703 shunts are available from 1 A up to 15,000 A with an accuracy of 0.5%. Standard voltage drop is 60 mV or 150 mV.
Data Sheet 800.D.101.07 Shunts Class 0.5 rated voltage drop rated current accuracy class 0.2 insulating base purpose built shunts on request on request produced in class 0.5 and calibrated to class 0.2 or produced in class 0.2 (please order dimensional drawing) suitable for shunts 30 ... 150 A / 60 mV others on request on request Accessory cover for shunts with insulating base 1 ... 25 A / 60 mV – 100 mV – 150 mV 30 ... 150 A / 60 mV rated voltage drop 60 ... 300 mV dimensions (in mm) a b c d 1 .
rated voltage drop 150 mV rated voltage drop 300 mV a 429 b 389 c 30 d 50 e 15 g M12x40 number of 2x 1 current connections 429 389 40 50 20 M16x45 2x 1 dimensions 1,500 A 2,500 A 4,000 A 6,000 A 10,000A (in mm) a 290 290 300 300 310 b 240 240 250 250 260 c 90 120 120 154 206 d 60 60 130 130 170 e 21 30 30 25 25 f 48 60 60 52 52 g M16x60 M20x60 M20x75 M20x75 M20x80 h 15 15 25 25 30 number of 2x 2 2x 2 2x 2 2x 3 2x 4 current connections 449 399 70 60 35 M20x50 2x 1 format version C h d rated voltage d
