User's Manual

with the last paired Bluetooth devices until the blue LED flashes quickly; if no connection happens after 10
seconds, it will come into standby mode.
z Long press pairing button in pairing state, then pair and connect it with other Bluetooth stereo transmitting
devices (e.g., mobile phone and PC) until red and blue lights blinking alternately. The blue LED is long on
when paired and connected successfully. Use Search for paring function on Bluetooth stereo transmitting
devices to find i110 (device name: RX-I110), and enter code “0000” will start pairing and connecting. Then
blue LED is long on when paired successfully.
z I110 will store the information of the last paired devices. Even if turned off or disconnected with Bluetooth
stereo transmitting devices, it needs no pairing when reconnected. Just use the following connecting functions,
then it will be ok.
1）Plug 110 into acoustic mainframe and it will automatically connect the last paired devices. Then make sure
that Bluetooth stereo transmitting devices are at a connective state.
2）At standby state, short press i110 pairing button to connect the last paired device until blue LED flash
quicky. When connected, blue LED is long on.
z ill0 supports AVRCP profile. Plug it into mainframe, and then the mainframe with remote control supports
basic play functions of Bluetooth stereo transmitting devices（e.g. PLAY, PAUSE, STOP, SKIP UP, SKIP
DOWN）.(Note: Because difference products have different software, it is natural that parts or all of their
remote control functions maybe invalid)。
Note:
1) Ill0 can only connect Bluetooth stereo devices with pin code “0000”, not Bluetooth stereo device with other
pin code.
2) When ill0’s red light is long on, it indicates that the internal program has error. Just pull i110 out of acoustic
mainframe and plug it in again, and then it will be ok.
* Specifications and features are subject to change without notice.