User Manual

9. Long-press 3-Way (about 3 seconds) to stop playing; short-press to
resume play.
10. To turn off the headset, long-press (about 5 seconds) MFB.
Note:You can use the headset to listen to other music players on your
computer. However, other players may not support using the 3-Way button.
3.3 MUSIC FUNCTIONS AT A GLANCE
4 Making Internet Phone Calls
There are many Internet phone services (VoIP) that let you make calls from your computer.
Because Internet calling uses a different Bluetooth headset profile than for music, you must add a
new connection for this function.
4.1 PAIRING WITH A COMPUTER FOR INTERNET CALLS
Disconnect from the Music profile if connected and turn off the headset. (You cannot make a new
connection if the headset is connected to another profile.)
1. To put the headset in pairing mode, long-press (about 5 seconds) MFB
until the LED flashes red/blue.
2. Right-click the Bluetooth Manager icon in the system tray and click
Add New Connection (fig 23).
3. Select the Custom Mode radio button and click Next. The wizard
searches for the device and the following screen appears (fig 24).
4. Select GSH300 and click Next (fig 25).
5. Under Service Class, select Headset and click Next (fig 26).
6. When you hear a signal tone on the headset, short-press MFB (fig 27).
7. Type a connection name such as Phone and click Next.
8. A registration confirmation screen appears. Click Finish to complete
the connection. The new connection is shown in the Bluetooth Settings window (fig 28).