User Manual

3 Music Playback
You can listen to music in high-quality stereo on your computer or an audio player if the device
supports streaming audio over Bluetooth (through a Bluetooth AV profile). You can purchase a
Bluetooth dongle (transmitter/receiver) that connects to the USB connector on the computer; some
models also connect to the audio-out connector on an MP3 player or other audio device.
3.1 PAIRING WITH A COMPUTER FOR MUSIC PLAYBACK
This section assumes you have already installed a Bluetooth USB dongle on your computer.
Before you can use the headset for music playback with your computer, you must pair the headset
with your computer. The headset must be turned on in pairing mode. The following instructions
are for pairing with the Toshiba® Bluetooth Setting utility.
1. To put the headset in pairing mode, long-press (about 5 seconds) MFB
until the LED flashes red/blue.
2. Right-click the Bluetooth Manager icon (fig 10) in the system tray
and click Service Properties (fig 11).
3. In the Service Properties window, check AV Remote Control Service
and click OK (fig 12).
4. Right-click the Bluetooth Manager icon in the system tray and click
Add New Connection (fig 13).
5. Select the Custom Mode radio button and click Next. The wizard
searches for the device and the following screen appears (fig 14).
6. Select GSH300 and click Next (fig 15).
7. Under Service Class, select Audio Sink and click Next (fig 16).
8. Type in the default passkey [0000] and click OK (fig 17).