User Manual

2.2 MAKING, REDIALING, AND ENDING CALLS
If your phone supports voice dialing, you can make the call from the headset. Otherwise, you must
initiate the call from your phone.
1. Voice dialing: Short-press MFB, then say the voice tag.
Phone keypad: Dial the number on the phone.
2. To end the call, short-press MFB (or use the end-call function on your
phone).
3. To redial the last number, long-press (about 3 seconds) 3-way .
Note:If necessary, rerecord your voice tags using the microphone on the
headset.
2.3 ANSWERING A CALL
If you want the headset to automatically answer incoming calls, enable this feature on your phone.
Auto answer: The headset rings on an incoming call and you are connected automatically.
Manual answer: When the headset rings for the incoming call, short-press MFB to connect.
Note:Some phones may not ring or may not transfer a ring tone to the
headset for incoming calls. You can still take the call as described above.
2.4 CALL WAITING AND THREE-WAY CALLING
1. To answer a second incoming call, short-press 3-way , the incoming
call will be accept and the active call will be held.
2. To join the second call with the first, long-press MFB, both calls are
active.
3. To release all call, short-press 3-way .
4. To answer a second incoming call, and release the active call, short-press
MFB.
5. To keep active call, and release other calls, short-press 3-way .
2.5 SWITCHING CALLS BETWEEN HEADSET AND PHONE
While you are making a call, you can switch the call between the headset and your phone.
Headset to phone: Long-press (about 3 seconds) MFB. (Or switch the call through your phone if
supported.) The call switches to your phone.
Phone to headset: Long-press (about 3 seconds) MFB. (Or switch the call through your phone if
supported.) The call switches back to the headset.
Phone to headset (when headset off): If the headset is off during a call, turn on the phone and
short-press MFB. The call switches to the headset.
2.6 REJECTING A CALL
If you do not want to take an incoming call, long-press MFB . The incoming call is cut off.
2.7 ADJUSTING THE VOLUME
You can adjust the volume during a call by pressing the volume buttons on the headset or the
volume buttons on your phone.
Press VOL+ to increase Vol+ the volume (fig 9).
Press VOL- to decrease the volume.
Long-press 3-Way
to mute the
microphone. Long-press again to
enable the microphone.
Note:Mute only affects the microphone. You can still hear the caller; but
the caller cannot hear you.
2.8 PHONE FUNCTIONS AT A GLANCE