User Manual

Page 8 of 11
8
Personal Area Network (PAN)
1.First select "PAN Server Service" in the "Service Properties" check box as showed in the figure
above. After the service is activated, an icon as showed below will appear on the toolbar.
2.In a PAN, the device that first accepts connection applications becomes Server automatically. All
else devices in the PAN are Clients.
3.A Client can be connected to a Server in the way it is connected to all other Bluetooth devices.
The Client becomes part of the network after a successful connection. The number of Bluetooth
devices in a PAN is as large as 7.
FAQs
Q1: A device available for pairing cannot be connected:
-Make sure the device is within range, and in pairing status, then try again.
Note: A Bluetooth device can only be found in "Visible" mode by other Bluetooth devices.
Q2: The services on a non-pairing remote device cannot be found:
-Check whether the power is on, or whether the device is in "Visible" mode.
Q3: Why can't some Bluetooth services be realized?
-Make sure you have selected the service in the "Service Properties" check box. Under default
condition, some services are not activated.
Q4:My notebook computer has an in-built Bluetooth driver, how to ignore it and choose to use the
Goertek driver?
-Click on Start->Settings->System->Hardware->Device Manager->bluetooth Radios, right click
the first item, and then click "Properties".
PAN server service