User manual

WI-MOD-9-E Wireless Ethernet User Manual
WI-MOD-9-E Manual V1.9 Page 70
Chapter Five SPECIFICATIONS
General
EMC specification FCC Part 15
EN 300 683
AS 3548
89/336/EEC
Radio specification FCC Part 15.427
AS 4268.2
RFS29 NZ
902 – 928MHz, 0.1 - 1W
915 – 928MHz, 0.1 - 1W
920 – 928MHz, 0.1 - 1W
Housing 4.5 x 5.5 x 1.2 inch
110 x 185 x 30mm
Powder-coated, extruded
aluminum
DIN rail mount
Terminal blocks Removable Suitable for 12 gauge (2.5sqmm)
conductors
LED indication Active, Serial RX and
TX, Radio RX and TX,
Link
Operating Temperature -40 to +140 degrees F
-40 to +60 degrees C
0 – 99% RH non-condensing
Power Supply
Nominal supply 10 to 30VDC Overvoltage and reverse voltage
protected
Current Drain @ 12VDC 280 mA During transmission 500mA
(1W)
Current Drain @ 24VDC 150 mA During transmission 300mA
(1W)
Ethernet Port
10/100 BaseT RJ45
Standard IEEE 802.3 compliant Bridge/router, Access point/
client functionality
Radio Transceiver
Spread-spectrum, frequency
hopping
50 channels, 8 hop sets 902 – 928 MHz
Transmit power 0.1 - 1W USA/Canada 4W ERP
Australia / NZ 1W ERP