User manual

Chapter Three Operation
Page 59 March 2010
Change the IP address to 192.168.0.53
Enter a System Generator String
Select the Radio Encryption required.
Set dipswitch to RUN.
Save the changes, and unit will reset. Wait for unit to complete reset.
• Open configuration webpage with Internet Explorer at address http://192.168.0.53/
Select Network settings menu option
When prompted for password, enter default username “user” and password “user”
Set the Gateway IP address to 192.168.102.54
Set the Ethernet IP address to 192.168.102.53, network mask 255.255.255.0
Set the Wireless IP address to 169.254.102.53, network mask 255.255.255.0
Click on button Save to Flash and Reset. Webpage will display that message indicating details
are being written to flash. Wait for WI-MOD-9-E to reboot before removing power.
Extending range of a network with a Repeater hop
Configure units as described in Section Extending a wired network. Place the Access Point at the
remote intermediate repeater location.