User manual

Chapter Three Operation
Page 27 March 2010
j) Type the command reset, or cycle power to the unit. The WI-MOD-9-E will reset and start
with the network settings you have entered.
k) Open Internet Explorer and ensure that settings will allow you to connect to the IP address
selected. If the PC uses a proxy server, ensure that Internet Explorer will bypass the Proxy
Server for local addresses. This option may be modified by opening Tools -> Internet
Options -> Connections Tab -> LAN Settings->Proxy Server -> bypass proxy for local
addresses.
l) Enter the webpage http://xxx.xxx.xxx.xxx/ where xxx.xxx.xxx.xxx is the IP address selected for
the module. A welcome webpage should be displayed as illustrated.
m) Clicking on any of the menu items, and entering the username “user” and password “user”
may open Configuration and Diagnostics. If the password has previously been configured
other than the default password, then enter this instead.