User manual

WI-MOD-9-E Wireless Ethernet User Manual
WI-MOD-9-E Manual V1.9 Page 24
• Open Internet Explorer and ensure that settings will allow you to connect to the IP address
selected. If the PC uses a proxy server, ensure that Internet Explorer will bypass the Proxy
Server for local addresses. This option may be modified by opening Tools -> Internet
Options -> Connections Tab -> LAN Settings->Proxy Server -> bypass proxy for local
addresses.
• Enter the default IP address for the WI-MOD-9-E http://192.168.0.1XX where XX is the last
two digits of the serial number
• A welcome webpage should be displayed as illustrated below.
• Configuration and Diagnostics may be opened by clicking on any of the menu items, and
entering the username “user” and default password “user”. Configure the unit to your
requirements (refer later sections of this manual).
When the configuration is complete, switch the Factory Default dip-switch on WI-MOD-9-E to
the RUN position, and cycle power to resume normal configured operation.