User manual

Page 77 February 2010
Chapter Five SPECIFICATIONS
General
EMC
specification
EN 300 683 FCC Part 90
Radio
specification
EN 300 328 FCC Part 15.247, RSS 210
Housing 114 x 140 x 30mm
4.5 x 5.5 x 1.2 inch
Powder-coated, extruded aluminum
DIN rail mount
Terminal blocks Removable Suitable for 12 gauge (2.5sqmm)
conductors
LED indication Active, Serial RX and TX,
Radio RX and TX, Link
Operating
Temperature
-35 to +60 degrees C
-30 to +140 degrees F
0 – 99% RH non-condensing
Power Supply
Nominal supply 9 to 30VDC Overvoltage and reverse voltage
protected
Average current
drain
240 mA @ 12V 150mA @ 24VDC
Current drain
when transmitting
440 mA @ 12V 280mA @ 24VDC
Ethernet Port
10/100 BaseT RJ45
Standard IEEE 802.3 compliant Bridge/router, Access point/ client
functionality
Radio
Transceiver
Transmit power Different models available. 100mW (20dBm) or 300mW (25dBm)
Channels 11 x 5MHz First channel centre at 2.412 GHz
Receiver
sensitivity
< 8% FER -96dBm @ 1Mb/s, -91dBm @ 11Mb/s
Antenna
Connector
Female SMA coaxial Two connectors for signal diversity
Wireless data rate
- configurable
1 to 11Mb/s “Auto” function determines fastest rate
within user-configured fade-margin