User manual

WI-MOD-E-100 & WI-MOD-E-300 Wireless Ethernet User Manual
WI-MOD-E Manual v1.10 Page 50
12. Ensure maximum speed is 115200bps, click OK
13. Select Networking Tab -> click on Internet Protocol
(TCP/IP) in list box and then click Properties button.
14. On Properties form click Advanced button
15. On Advanced TCP/IP Settings form->General
Tab, uncheck field in PPP link stating "Use IP
header compression".
16. Configuration is now complete. Click on this
newly created link to establish a connection to
WI-MOD-E.
17. Ensure both the username and the password are entered exactly as configured in WI-MOD-E.
(When booted in SETUP mode, the PPP server has username “user” and password “user”.)