User manual

Weidmuller Wireless Ethernet Modem & Device Server WI-MOD-945-E User Manual
Page 91 www.weidmuller.com Rev 2.136
RS-485 Led is showing a green indication which means the Throughput to the
Access Point is greater than 10 Mbps. If the Led showed a Red indication this would mean the throughput is between
10Mbps & 4 Mbps.
Radio Path Test can be accesses by selecting the link from the “System Tools” page and then ticking the “Enable Radio
Path Test” and entering in appropriate thresholds levels to indicate RSSI and Throughput.
Note: Advanced configuration settings such as Serial or I/O Transfer should be disabled and if using the
Throughput Test, Iperf Server in the Advanced Radio Settings page on the Access Point must be
enabled.
Figure 75 - Throughput Test LEDS