User manual

WI-GTWY-9-xxx Wireless Gateway User Manual V1.18
7
3.3 POWER SUPPLY 32
3.3.1 AC Supply 33
3.3.2 DC Supply 33
3.3.3 Solar Supply 34
3.4 INPUT / OUTPUT 35
3.4.1 Digital Inputs / Outputs 35
3.5 SERIAL PORT 36
3.5.1 RS232 Serial Port 36
3.5.2 RS485 Serial Port 37
3.6 PROFIBUS PORT 38
3.7 ETHERNET PORT 39
3.8 MODBUS PLUS PORT 40
3.9 DEVICENET PORT 41
CHAPTER 4 CONFIGURATION 42
4.1 INTRODUCTION 42
4.2 CONFIGURATION PROGRAM 43
4.2.1 Program Operation 44
4.2.2 Security 47
4.3 UPLOADING AND DOWNLOADING 49
4.3.1 Loading from a WI-GTWY-9-xxx 50
4.4 MAPPINGS WI-GTWY-9-XXX TO WI-I/O 9-X I/O MODULES 51
4.4.1 Mappings from Inputs at Remote WI-I/O 9-x I/O Modules 51
4.4.2 Mappings from WI-GTWY-9-xxx to Outputs at Remote WI-I/O 9-x I/O Modules 52
4.4.3 Don’t Send if in Comm Fail 54
4.4.4 Startup Polls 55
4.4.5 Polls to Remote Modules 55
4.5 MAPPINGS FROM WI-GTWY-9-XXX TO OTHER WI-GTWY-9-XXX MODULES 55
4.5.1 Entering a Block Mapping 57
4.5.2 Host Device Trigger 58
4.5.3 Time Period 59
4.5.4 Real-Time 60
4.5.5 Change-of-State 62
4.5.6 Block Read Mappings 62
4.5.7 Mixing Normal Mappings and Block Mappings 63
4.5.8 Block mapping to Internal I/O registers 63
4.5.9 Comms Fail for Block Mappings 64
4.5.10 “Repeater-only” Configuration 64
4.6 CHANGE SENSITIVITY & I/O VALUE SCALING 65
4.6.1 Change Sensitivity 65
4.6.2 I/O Value Scaling 66
4.6.3 Unit Details 69
4.6.4 Number of TX only transmissions 69
4.6.5 Reset on Buffer Empty (Firmware version 1.83 and later) 69
4.7 SERIAL CONFIGURATION - MODBUS 70
4.7.1 MODBUS Slave 70
4.7.2 MODBUS Master 72
4.8 SERIAL CONFIGURATION - DF1 75
4.9 FIELDBUS CONFIGURATION 80
4.9.1 Fieldbus Mappings 81
4.10 FIELDBUS CONFIGURATION - PROFIBUS SLAVE 87