User manual

WI-GTWY-9-xxx Wireless Gateway V1.18
43
All of these steps must be performed to configure the WI-GTWY-9-xxx module.
4.2 Configuration Program
The configuration software is available on a CD, and needs to be installed on your PC before you
can use it. The CD contains a setup file called setup.exe. Select the configuration software
window on the Product CD and an installation Wizard will guide you through the installation
procedure. To upload and download configuration files to a module, you will need a RS-232
serial cable as shown below.
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
Required
Optional
WI-GTWY-9-xxx PC
DB9 Male DB9 Female