User manual

WI-GTWY-9-xxx Wireless Gateway User Manual
167
NOTE: In the current firmware implementation “IP Address”, “Subnet Mask”, “Gateway
Address”, and “SMTP Address” will always be overridden by the values used in
configuration software (i.e. those values cannot be set by writing to this file).
The contents of this file can be redirected by placing the line ‘[File path]’ on the first row,
and a file path on the second. This procedure is exactly the same as with the system file
“ip_accs.cfg” (see above). For example, redirecting the contents of this file to the “\user”
directory would allow “Normal Mode” users to have access to this file.
Structure
The figure below illustrates the structure of the file system, where the system files are located,
and which areas Normal/Admin users can access. The files and directory structure must be
created by the user using FTP or Telnet. The required .cfg file structures are outlined in the
‘System Files’ section below.
http.cfg (Web server settings)
email
pswd
user
pswd
email
ssi_str.cfg (SSI output strings)
ethcfg.cfg (Network settings)
telwel.cfg (Telnet welcome message)
onoffln.cfg (ON/OFF-line configuration)
ip_accs.cfg (IP addresses of allowed clients)
Root directory for Admin users
Root directory
for Normal users
(Files in this directory and its subdirectories
are protected from access through the
webserver)
sys_pswd.cfg (Passwords for Normal mode users)
email_1.cfg
email_10.cfg
(User defined email files)
(Files in this directory and its subdirectories
are protected from access through the
webserver)
ad_pswd.cfg (Passwords for Normal mode users)
email_1.cfg
email_10.cfg
(Adminr defined email files)