User manual

WI-GTWY-9-xxx Wireless Gateway V1.18
114
• Data [ 1 ...n ]
Data that should be written.
• Fault Information
If ‘Invalid Other ’is returned in the Message Information word in the header of the response,
information about the fault can be found here.
0001h: Address out of range
000Ah: Failed to execute MSAC1_Alarm_Ack request
000Bh: Remote station failure
0010h: Remote Station DPV1 Failure (see ‘Error Decode’ below).
0011h: Too much data is sent to the slave (more than Max_Channel_Data_Len)
00FFh: Module not initialized
• Error Decode, Error Code 1 & Error Code 2
If ‘Fault Information’ contains error code 0010h, more information according to the DPV1
specification can be found here.