User manual

WI-GTWY-9-xxx Wireless Gateway V1.18
112
• Data [1 ...n]
Returned data
• Return Code
See "Return Codes" in section “DP Error Codes ” below.
• Fault Information
If ‘Invalid Other ’is returned in the Message Information word in the header of the response,
information about the fault can be found here.
0001h: Address out of range
000Ah: Failed to execute MSAC1_Alarm_Ack request
000Bh: Remote station failure
0010h: Remote Station DPV1 Failure (see ‘Error Decode’ below).
00FFh: Module not initialized
• Error Decode, Error Code 1 & Error Code 2
If ‘Fault Information ’ contains error code 0010h, more information according to the DPV1
specification can be found here.