User`s manual

Safety instructions
5658600000/00/05.07
7
• Do not spill any fluids into the Speed-
Marking-Laser.
• Place the device onto a solid, flat sur-
face. Otherwise, it could fall down and
lead to possible danger to personnel.
• For installation in limited space, make
sure that there is sufficient ventilation for
the device.
• Do not block or cover openings of the
SpeedMarking-Laser.
• Do not insert any objects into these
openings.
This device is not to be operated with-
out supervision.
The internally-emitting radiation is kept in-
side the printer by the protective housing
and the external cover. The laser beam
cannot emit from the device during opera-
tion.
The printer cannot be used or maintained if
the protective cover is taken off the laser or
scanner unit. The reflective beam is invisi-
ble and can damage the eyes.
Warning signs (BGV A 8 (VBG 125) & DIN 4844)
WARNING
Mind your hands.
Do not reach inside.
WARNING
Hot surface.
Do not touch.