Installation guide

www.weidmueller.com
3.22 Assigning the SMS groups
Once you have setup the SMS Groups and Addresses for the site, you can assign which groups get sent a
text when there is an alarm triggered. Operation is set using the SMS Groups Tab at Custom Devices Group
or String Box Group Level. Simply click the box next to the group to toggle the setting. A green tick indicates
an SMS will be sent.
In the example shown, PV-Clinic Runtime will send an SMS to the phone number defined for ‘Brad’ when
any alarm configured for the String boxes in group ‘inv1’ is triggered.
Note: PV Clinic Runtime monitors values and sends alarm SMS messages; if it is not running then SMS
messages will not be sent to warn of alarm conditions.