Installation guide

32 PV Clinics Installation Manual 21/07/11 01.00
3.18 SMS Communications device
To allow PV-Clinic Runtime to send SMS messages you need a GSM modem that accepts the extended
Hayes (AT) style commands for managing the SMS features. Most GSM modems will accept this command
set.
Set up the communications parameters by adding a communications device as shown above. If you are us-
ing a USB device it may be installed as a virtual COM Port (see above for details).
Note: ETSI GSM 07.05/3GPP TS 27.005 gives details of the AT command set.