Installation guide

www.weidmueller.com
3.17 Assigning the Email Groups
Once you have setup the Email Groups and Addresses for the site, you can assign which groups get emails
when there is an alarm triggered. Operation is set using the Email Groups Tab at Communications, Custom
Devices Group or String Box Group Level. Simply click the box next to the group to toggle the setting. A
green tick indicates emails will be sent.
In the example shown, PV-Clinic Runtime will send an email to the addresses defined for ‘Bill’ when any
alarm configured for the string boxes in group inv1 is triggered.
Note: PV Clinic Runtime monitors values and sends alarm emails; if it is not running then emails will not be
sent to warn of alarm conditions.