Installation guide

26 PV Clinics Installation Manual 21/07/11 01.00
3.12 User settings screen
A PV-Clinics user is defined by the username and the host ('computer') that the User connects from. To add
a new user select Users > New > User from the top menu.
Username
The username can be up to 16 characters long.
Note: depending on the DB User Name Setting of the system, you use either the Username format or
UserGroup.UserName format when logging in to the system.
Enable
Uncheck this checkbox temporarily disable access to the system for this user. For example, if the user is on
holiday or during commissioning.
Host name
The host specifier can be an IP-address or any kind of hostname and alias that can be resolved by looking
up the hostname on a server on either the local network or the Internet. Wildcards can be used. For instance
the wildcard '%' means 'any host'. So if the host is defined as ‘%' the user can connect from anywhere. Defin-
ing a specific IP address allows an added layer of security.
Password
After defining the username and specifying the host you can (and it is recommended) specify a password for
the user. The password must be retyped correctly (a green tick will appear to show that the passwords
match).
Full Name and Description
Add these details for your reference - they do not affect the operation of the software.