Installation guide

www.weidmueller.com
2.3.3 Install PV-Clinic Runtime
Installation
There are no options to select, simply run the file PV-Clinic Runtine.msi on the Control room PC.
USB Product key
PV-Clinic Runtime requires that you plug the installation key into one of the USB ports of the Control room
PC. For windows 7 the drivers will install automatically. For older versions of Windows, install the driver by
running the file HASPUserSetup.exe from the USB stick.
Note: without the installation key, the program will run in DEMO mode which shows simulated values but
does not collect or store values from the plant. Demo mode is indicated by in the title bar of the program.
To start monitoring your PV Plant with PV-Clinic Runtime
Click the PV-Clinic Runtime icon on your desktop, monitoring will start after a 20s delay. The USB Product
key must be connected.