User manual

UMSLMODGW-1006 9

3.9 Connecting Ethernet

The following table describes the 10BASE-T Ethernet RJ-45 connector pinout:

TX+

TX-

RX-

RX+

Pin Signal Function

1 TX+ Non-inverting transmit signal

2 TX- Inverting transmit signal

3 RX+ Non-inverting receive signal

4 Internal termination network

5 Internal termination network

6 RX- Inverting receive signal

7 Internal termination network

8 Internal termination network

Table 3.4: Ethernet connector pinout

• We recommend to use Category 5 UTP network cable.

• Maximum cable length is 100 m (3000 ft).