User Manual

Configuration
4-52
The message targets form a message sequence.
The message sequence is interrupted if a target of this sequence
was informed successfully, including acknowledgement.
If a message target is to be informed in any case, irrespective of
its position in the message sequence, the message targets must
be marked additionally with "ALW".
- Example: Shift schedule in a sequence of 3 and additionally a
fax to the exchange centre, which is always to be sent. -
Message targets that are marked with an "I" have no influence on
the message sequence, i.e. even if such a message target was
informed successfully, the message sequence is not quit.
Weekday
The relevant message is only sent on the marked days of the week;
thus, a simple shift schedule can be realised.
from - to
The message is sent during the time "from - to".
If the time period passes midnight, the message is still sent even if
the second day of the week is not marked,
for example, from = 07:00 p.m. to = 08:00 a.m. Mon
Tue is marked.
If the input is now triggered on Wednesday at 07:50 a.m., the
message is sent even though Wed is not marked.
Switch if
Here you can specify that one of the digital outputs can be
switched:
If no message target was informed successfully.
If one message target was informed successfully.
If all message targets were informed successfully.
Message targets marked with "ALW" are ignored.
Save your settings before switching to a different input!
NOTE