User Manual

Configuration
4-50
4.6 Alarm Message
Input
The following events can be selected to trigger a message:
REPORT An error has occurred, e.g. faulty
login into the GPRS network
DI1 ... DI4 Digital inputs 1 to 8
AI1 … AI2 Analog inputs 1 and 4
EI1 … EI16 Signal inputs, serial, via the TUP protocol
Text
Enter the text you wish to be displayed in the message in the text
field, for example "Fault: Pump".
The maximum length permitted, including all text blocks, is 160
characters.
Longer texts will be truncated.
The following text blocks can be used to create a message text
dynamically:
#HEAD# Inserts the header (menu option "General").
#DATE# Inserts the sending date of the message.
#TIME# Inserts the sending time of the message.