User guide

ManualsBrandsWeidmuller ManualsHardwareG408 Ultra SlimPak

Weidmuller Ltd.

10 Spy Court

Markham, ON L3R 5H6

Tel: (905)475-1507

Fax: (905)475-5855

Weidmuller Ltd

821 Southlake Blvd.

Richmond, VA 23236 U.S.A.

Tel: (804)794-2877

Fax: (804)794-0252

ISO 9001 Registered

Electronic Interface Modules

G408 Ultra SlimPak®

DC Input, Field Configurable Isolator

• field configurable via DIP switches for different input-

output combinations

• eliminates ground loops and isolates to 1800Vdc

between input, output and power

• field configurable input ranges 10mV to 100V, 1mA to

100mA

• field configurable output ranges 0-10V, 0-5V, 0-20mA,

4-20mA, 0-1mA

• ultra slim package 12.7mm

• 9 to 30Vdc powered

• CSA approved, UL recognized, CE marked

Summary of content (4 pages)

PAGE 1
Electronic Interface Modules G408 Ultra SlimPak® DC Input, Field Configurable Isolator • field configurable via DIP switches for different inputoutput combinations • eliminates ground loops and isolates to 1800Vdc between input, output and power • field configurable input ranges 10mV to 100V, 1mA to 100mA • field configurable output ranges 0-10V, 0-5V, 0-20mA, 4-20mA, 0-1mA • ultra slim package 12.7mm • 9 to 30Vdc powered • CSA approved, UL recognized, CE marked Weidmuller Ltd.
PAGE 2
Table 1: G408 input range selector - switch settings Table 3: Output range selector - switch settings Key: n ON Table 2: Input range and function settings Description The Ultra SlimPak G408 is a DIN rail mount, DC input signal conditioner with 1800Vdc isolation between input, output and power. The field configurable input and output offers flexible, wide ranging capability for DC current and voltage signals.
PAGE 3
Configuration Calibration A major advantage of the G408 is its wide ranging capability and ease of configuration. The G408 has 18 input range settings. Trim potentiometers allow 50% input zero and span adjustability within each of the 18 full scale input ranges.
PAGE 4
12.6 110.2 TS32 RAIL 105.2 TS35 RAIL 88.5 90.0 Rated data Input Range Impedance DC current or voltage ±1mA to ±100mA or ±10mVdc to ±100Vdc, DIP switch selectable 20M for current, >100kM for voltage Maximum ratings / type of protection 170mA, 60Vdc for current, 264Vrms for voltage Field device excitation Other input specification Other input specification Output DC current or voltage Range 0-1mA, 0-20mA, 4-20mA, 0-5Vdc or 0-10Vdc, DIP switch selectable Load <7.