Data Sheet

Data sheet
Klippon BDX (compensating elements)
KLIPPON BDX M20 B
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date May 27, 2019 2:51:02 PM CEST
Catalogue status 23.05.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Length 22 mm
Length (inches) 0.866 inch
Width 27 mm
Width (inches)
1.063 inch
Net weight 62 g
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
Certificate numbers cable gland
Certificate no. cable gland (ATEX) SIRA 09ATEX3321X
Certificate no. cable gland (IECEx) IECEx SIR 09.0132X
Certificate no. cable gland (EAC) RU C-GB.ГБ06.B.00098
Certificate no. cable gland (LOYDREG) 10/00056
Certificate no. cable gland (MARITREG) 09.00783.011
Certificate no. cable gland (CSA) 2310046
General information
AF size 1 27 mm
Explosion protection type Improved safety Ex e
External thread
M 20
Filter Bronze insert (90% copper,
10% tin)
Impact resistance 7 J ATEX version
Length of thread 10 mm
Material
Brass
Note: protection class - The venting element
should be fitted on
the bottom side of
the enclosure, aligned
vertically with the thread
upwards, and at the lowest
point to permit proper
drainage. - The supplied
assembly instructions
must be read prior to
installation and strictly
adhered to. - The water
flow rate was tested using
a water-filled, empty
enclosure (no pressure or
heat-producing internal
components). The water
flow rate may vary due to
operational parameters
and environmental
conditions.
O-Ring Silicone
Operating temperature range, max. 200 °C
Operating temperature range, min. -60 °C
Pitch of thread 1.5 mm
Protection degree IP66
Protection degree with GWDR IP66
Sealing
Silicone
Standards IEC 60079-0, IEC
60079-7, IEC 60079-31
Torque for connecting adapter, max. 10 Nm
Torque for connecting adapter, min. 10 Nm
Torque for lock nut, max. 10 Nm
Torque for lock nut, min. 10 Nm
Classifications
ETIM 6.0 EC000814
eClass 6.2 27-14-91-09
eClass 9.0 27-14-44-25
eClass 9.1 27-14-44-90