Data Sheet
Data sheet
OMNIMATE Signal - series BL/SL 3.50
BLIDCB 3.50/03/-F SN OR BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date May 27, 2019 3:02:51 PM CEST
Catalogue status 23.05.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Height 12.5 mm
Height (inches) 0.492 inch
Depth 21.2 mm
Depth (inches)
0.835 inch
Net weight 4.9 g
system parameters
Product family OMNIMATE Signal - series
BL/SL 3.50
Type of connection
Field connection
Wire connection method IDC terminal
Pitch in mm (P) 3.5 mm
Pitch in inches (P) 0.138 inch
Conductor outlet direction 90°/270°
No. of poles 3
L1 in mm 7 mm
L1 in inches 0.276 inch
Number of rows 1
Pin series quantity 1
Rated cross-section 0.5 mm²
Touch-safe protection acc. to DIN VDE
57 106 Safe from finger touch
Touch-safe protection acc. to DIN VDE
0470 IP 20
Volume resistance 7.00 mΩ
Can be coded Yes
Tightening torque for screw flange, min. 0.15 Nm
Tightening torque for screw flange, max. 0.2 Nm
Screwdriver blade 0.4 x 2.5
Screwdriver blade standard DIN 5264-A
Plugging cycles 25
Plugging force/pole, max.
7.5 N
Pulling force/pole, max. 5.5 N
Material data
Insulating material PBT
Colour orange
Colour chart (similar) RAL 2000
Insulating material group IIIa
CTI
≥ 200
Insulation strength
≥ 10
8
Ω
UL 94 flammability rating V-0
GWFI 960 °C
Contact material CuSn
Contact surface tinned
Storage temperature, min. -25 °C
Storage temperature, max. 55 °C
Max. relative humidity during storage 80 %
Operating temperature, min. -50 °C
Operating temperature, max. 80 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max. 80 °C
Conductors suitable for connection
Clamping range, min. 0.32 mm²
Clamping range, max. 0.5 mm²
Wire connection cross section AWG,
min. AWG 22
Wire connection cross section AWG,
max. AWG 20
Solid, min. H05(07) V-U 0.35 mm²
Solid, max. H05(07) V-U 0.5 mm²
Flexible, min. H05(07) V-K 0.35 mm²
Flexible, max. H05(07) V-K 0.5 mm²
Outer diameter of insulation, max.
2.1 mm
Reference text The outside diameter of
the plastic collar should
not be larger than the pitch
(P).
Max. clamping range 0.5 mm²