Datasheet
Datenblatt
TERMSERIES
TRZ 48VUC 1CO
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 1429-0
Fax: +49 5231 14292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum 28 August 2017 10:05:35 CEST
Katalogstand 11.08.2017 / Technische Änderungen vorbehalten 2
Dimensions and weights
Width 6.4 mm
Width (inches) 0.252 inch
Height 90.5 mm
Height (inches) 3.563 inch
Depth 87.8 mm
Depth (inches)
3.457 inch
Net weight 32.1 g
Temperatures
Humidity 5–95% rel. humidity, T
u
=
40°C, no condensation
Operating temperature
-40 °C...60 °C
Storage temperature -40 °C...85 °C
Input
Rated control voltage 48 V UC ± 10 %
Rated current AC 8 mA
Rated current DC 7 mA
Power rating 240 mVA / 192 mW
Pull-in/drop-out voltage, typ. 32 V / 9 V AC
33 V / 8.5 V DC
Pull-in/drop-out current, typ. 5.3 mA / 1.2 mA AC
4.5 mA / 0.8 mA DC
Status indicator Green LED
Protective circuit Rectifier
Coil voltage of the replacement relay
deviating from the rated control voltage Yes
Coil voltage of the replacement relay
24 V DC
Output
Rated switching voltage 250 V AC
Max. switching voltage, AC 250 V
Max. switching voltage, DC 250 V
Continuous current 6 A
Inrush current 20 A / 20 ms
AC switching capacity (resistive), max. 1500 VA
DC switching capacity (resistive), max. 144 W @ 24 V
Switch-on delay ≤ 9 ms
Switch-off delay
< 25 ms
Min. switching power 1 mA @ 24 V, 10 mA @ 12
V, 100 mA @ 5 V
Max. switching frequency at rated load 0.1 Hz
Contact data
Contact type
1 CO contact (AgNi)
Mechanical service life
5 x 10
6
switching cycles
General data
Mounting rail TS 35
Test button No
Mechanical switch position indicator No
UL 94 flammability rating V-0
Insulation coordination
Rated voltage
300 V
Creepage and clearance distance input –
output ≥ 5.5 mm
Dielectric strength input – output 4 kV
eff
/ 1 min.
Dielectric strength to mounting rail 4 kV
eff
/ 1 min.
Dielectric strength of open contact 1 kV
eff
/ 1 min
Impulse withstand voltage
6 kV (1.2/50 µs)
Protection degree IP20
Pollution severity
2
Surge voltage category III
Further details of approvals / standards
Standards EN 50178, EN 55011, EN
61000-6-1, 2, 4
Certificate No. (GERMLLOYD)
47053-12
Certificate no. (cULus) E141197