Datasheet
Data sheet
W-Series
WDK 2.5PE
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date February 4, 2015 8:05:04 AM CET
Catalogue status xx.xx.xxxx / We reserve the right to make technical changes. 2
Dimensions and weights
Width 5.1 mm
Height 69.5 mm
Depth 62.5 mm
Weight
18.1 g
Net weight 17.62 g
Temperatures
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Additional technical data
Explosion-tested version Yes
Number of similar terminals 1
Open sides right
Type of mounting
Snap-on
Version Screw connection, With
PE connection, One end
without connector
CSA ratings data
Certificate No. (CSA) 200039-1057876
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA) 26 AWG
Clampable wires (rated connection)
Type of connection Screw connection
Stripping length 10 mm
Connection direction top
Number of connections 4
Clamping range, rated connection, min. 0.05 mm²
Clamping range, rated connection, max. 4 mm²
Clamping screw M 2.5
Tightening torque, min. 0.4 Nm
Tightening torque, max. 0.6 Nm
Gauge to IEC 60947-1 A3
Wire connection cross section, solid
core, min. rated connection 0.5 mm²
Wire connection cross section, solid
core max. rated connection 4 mm²
Wire connection cross section, stranded,
rated connection, min. 1.5 mm²
Wire connection cross section, stranded,
rated connection, max. 4 mm²
Wire connection cross section, finely
stranded, max. 4 mm²
Wire connection cross-section, finely
stranded, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max. 2.5 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min. 0.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max. 2.5 mm²
Dimensions
TS 35 offset 32 mm
Rated data
Rated voltage to adjoining terminal
400 V
Rated impulse withstand voltage to
adjacent terminal 6 kV
Standards IEC 60947-7-2
Pollution severity 3