Data Sheet

Datenblatt
W-Series
WDK 2.5PE
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum December 13, 2013 11:45:10 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 69.5 mm
Width 5.1 mm
Height 62.5 mm
Height of lowest version 63.5 mm
Weight 18.1 g
Net weight 17.62 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Rated data IECEx/ATEX
Certificate No. (ATEX) KEMA98ATEX1687U
ATEX certificate KEMA98ATEX1687U_d.pdf
ATEX certificate KEMA98ATEX1687U_e.pdf
IEC Ex certificate IECEXULD05.0008U_e.pdf
Wire cross section max. (ATEX) 2.5 mm²
Voltage, cross-connection CrossConnectionGuide.pdf
Operating temperature range For operating temperature
range see EC Design
Test Certificate / IEC Ex-
Certificate of Conformity
Marking EN 60079-7
Ex e II
Marking ATEX Directive 94/9/EC II 2 G D
Additional technical data
Explosion-tested version Yes
Installation advice Direct mounting
Number of similar terminals 1
Open sides right
Type of mounting
Snap-on
Version Screw connection, With
PE connection, One end
without connector
CSA ratings data
Certificate No. (CSA) 200039-1057876
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA) 26 AWG
Clampable wires (rated connection)
Type of connection Screw connection
Stripping length 10 mm
Connection direction top
Number of connections 4
Clamping range, rated connection, min. 0.05 mm²
Clamping range, rated connection, max. 4 mm²
Clamping screw M 2.5
Tightening torque, min. 0.4 Nm
Tightening torque, max. 0.6 Nm
Gauge to IEC 60947-1 A3
Wire connection cross section, solid
core, max. rated connection 0.5 mm²
Wire connection cross section, solid
core max. rated connection 4 mm²
Wire connection cross section, stranded,
rated connection, min. 1.5 mm²
Wire connection cross section, stranded,
rated connection, max. 4 mm²
Wire connection cross section, finely
stranded, max. 4 mm²
Wire connection cross-section, finely
stranded, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max. 2.5 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min. 0.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max. 2.5 mm²