Datasheet
Data sheet
W-Series
WDU 16N BL
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date November 21, 2013 3:03:51 PM CET
Catalogue status / We reserve the right to make technical changes. 2
Dimensions and weights
Length 60 mm
Width 12 mm
Height 46.5 mm
Height of lowest version 47 mm
Weight 24.85 g
Net weight 24.06 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
2 clampable wires (H05V/H07V) same cross-section (rated connection)
Wire connection cross section, finely
stranded, two clampable wires, min. 1.5 mm²
Wire cross-section, finely stranded, two
clampable wires, max. 4 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, 2 clampable wires, min. 1.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, 2 clampable wires, max. 4 mm²
Additional technical data
Explosion-tested version No
Installation advice Direct mounting
Number of similar terminals 1
Open sides closed
Type of mounting
Snap-on
Version Screw connection,
for screwable cross-
connection
CSA ratings data
Certificate No. (CSA) 200039-1057876
Voltage size C (CSA) 300 V
Voltage size D (CSA) 600 V
Current size C (CSA) 70 A
Current size D (CSA) 5 A
Wire cross section max. (CSA)
6 AWG
Wire cross section min. (CSA) 14 AWG
Clampable wires (rated connection)
Type of connection Screw connection
Stripping length 12 mm
Blade size 1.0 x 5.5 mm
Connection direction on side
Number of connections 2
Clamping range, rated connection, min. 1.5 mm²
Clamping range, rated connection, max. 25 mm²
Clamping screw M 4
Tightening torque, min. 1.2 Nm
Tightening torque, max. 2.4 Nm
Torque level with DMS electric
screwdriver 4
Gauge to IEC 60947-1
B7
Wire connection cross section, solid
core, max. rated connection 1.5 mm²
Wire connection cross section, solid
core max. rated connection 16 mm²
Wire connection cross section, stranded,
rated connection, min. 1.5 mm²
Wire connection cross section, stranded,
rated connection, max. 25 mm²
Wire connection cross section, finely
stranded, max. 16 mm²
Wire connection cross-section, finely
stranded, min. 1.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min. 1.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max. 16 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min. 1.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max. 16 mm²
Wire connection cross section AWG,
min. AWG 14
Wire connection cross section AWG,
max. AWG 6