Data Sheet

Datenblatt

W-Series
WPE 2.5
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: [phone]
Fax: [phone]
www.weidmueller.com
Technische Daten


Erstellungs-Datum December 13, 2013 11:04:51 AM CET
 Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights

Length 60 mm

Width 5.1 mm
Height 46.5 mm

Height of lowest version 47 mm
Weight 18.86 g

Net weight 16.22 g

Temperatures

Operating temperature

Storage temperature
Continuous operating temp., min. -50 °C

Continuous operating temp., max. 120 °C

Rated data IECEx/ATEX

Certificate No. (ATEX) KEMA98ATEX1683U

ATEX certificate KEMA98ATEX1683U_d.pdf
ATEX certificate KEMA98ATEX1683U_e.pdf

IEC Ex certificate IECEXULD05.0008U_e.pdf
Wire cross section max. (ATEX) 2.5 mm²

Voltage, cross-connection CrossConnectionGuide.pdf
Operating temperature range For operating temperature
range see EC Design
Test Certificate / IEC Ex-
Certificate of Conformity

Marking EN 60079-7
Ex e II
Marking ATEX Directive 94/9/EC II 2 G D



Additional technical data

Explosion-tested version Yes

Installation advice Direct mounting
Number of similar terminals 1

Open sides right
Type of mounting
Screwed

Version Screw connection, With
PE connection, One end
without connector

CSA ratings data

Certificate No. (CSA) 200039-1888378

Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA) 26 AWG



Clampable wires (rated connection)

Type of connection Screw connection

Stripping length 10 mm
Blade size 0.6 x 3.5 mm

Connection direction top
Number of connections 2

Clamping range, rated connection, min. 0.05 mm²
Clamping range, rated connection, max. 4 mm²

Clamping screw M 2.5
Tightening torque, min. 0.4 Nm

Tightening torque, max. 0.6 Nm
Torque level with DMS electric
screwdriver 1

Gauge to IEC 60947-1
A3
Wire connection cross section, solid
core, max. rated connection 0.5 mm²

Wire connection cross section, solid
core max. rated connection 4 mm²
Wire connection cross section, stranded,
rated connection, min. 1.5 mm²

Wire connection cross section, stranded,
rated connection, max. 4 mm²
Wire connection cross section, finely
stranded, max. 4 mm²

Wire connection cross-section, finely
stranded, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min. 0.5 mm²

Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max. 2.5 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min. 0.5 mm²

Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max. 2.5 mm²
Wire connection cross section AWG,
min. AWG 30

Wire connection cross section AWG,
max. AWG 12
