Document of Conformity

Job Id: 262.1-031749-1

Certificate No: TAE00003N2

Form code: TA 251 Revision: 2016-12 www.dnvgl.com Page 2 of 2

Product description

Fuse terminal blocks:

ZSI 2.5-2/2x2AN/G20 (GL) 250V 6.3 A 2.5mm²

ZSI 2.5-2/2x2AN/G20 250V 6.3 A 2.5mm²

ZSI 2.5-2/2x2AN/G25 (GL) 250V 6.3 A 2.5mm²

ZSI 2.5-2/2x2AN/G25 250V 6.3 A 2.5mm²

ZSI 6- 2/2x2.5/G20 (GL) 250V 6.3A 2.5mm² + 6mm²

ZSI 6- 2/2x2.5/ G20 250V 6.3A 2.5mm² + 6mm²

ZSI 6- 2/2x2.5/G25 (GL) 250V 6.3A 2.5mm² + 6mm²

ZSI 6- 2/2x2.5/G25 250V 6.3A 2.5mm² + 6mm²

Insulation voltage terminal – terminal 800V

Pollution degree 3

Overvoltage categorie III

Tracking index CTI 600

Material PA 6.6, V0

Application/Limitation

Operating and installation instruction of the manufacturer to be observed.

Location Classes:

Temperature: B

Humidity: B

Vibration: B

Type Approval documentation

Test reports: LAB 11718; 11720; 11721; 11722; 12391

Tests carried out

Applicable tests according to: DNVGL Class Guideline DNVGL-CG-0339, Edition November 2016

IEC 60947-7-1:2009, IEC 60947-7-3:2009.

Marking of product

Manufacturer – Type designation – Main data

Periodical assessment

The scope of the periodical assessment is to verify that the conditions stipulated for the Type approval

are complied with and that no alterations are made to the product design or choice of materials.

The main elements of the assessment are:

• Inspection on factory samples, selected at random from the production line (where practicable).

• Results from Routine Tests (RT) checked (if not available tests according to RT to be carried out).

• Review of type approval documentation.

• Review of possible change in design, materials and performance.

• Ensuring traceability between manufacturer’s product type marking and Type Approval Certificate.

Periodical assessment is to be performed after 2 years and after 3.5 years. A renewal assessment will be

performed at renewal at renewal of the certificate.

END OF CERTIFICATE