Approval/Certificate/Document of Conformity

Job Id: 262.1-023402-7
Certificate No: TAE00003F1
Revision No: 1
Form code: TA 251 Revision: 2016-12 www.dnvgl.com Page 3 of 4
Type
Designation
Current Expl.
Group
Rated
voltage
Rated
cross- section
(A) (V) (mm
2
)
ZSI 2,5/2/LD 60AC 10 60AC/30DC 2,5
ZSI 2,5/LD 120AC 6,3 120AC/60DC 2,5
ZSI 2,5/LD 28AC 6,3 28AC/14DC 2,5
ZSI 2,5/LD 250AC 6,3 250AC/110DC 2,5
ZSI 2,5/LD 60AC 6,3 60AC/30DC 2,5
ZSI 2,5/5x25 6,6 500 2,5
ZSI 6-2/FC 30 400 6
ZTR 2,5 20 500 2,5
ZTR 2,5/O,TNHE 10 400 2,5
ZTR 2,5/D (+,-,/DRBR) 10 500 2,5
ZTR 2,5-2 (O. TNHE) 10(1) 400 2,5
ZTR 2,5-2/SI (-DU, DU/PE, LD) 6,3 250 2,5
ZDTR 2.5 16 400 2,5
Tracking Index : I (CTI 600), Pollution degree : 3. Overvoltage category : III
Insulation material : ZTR = Wemid or Polyamide (PA), ZSI = Wemid
Manufactured by
Romania Czech Republic
S.C. Weidmüller Interface Romania
S.R.L.
EWE s.r.o.
Tautii-Magheraus 915/A Dvorská 605
437345 Tăuţii-Măgherăuş, Romania 563 01 Lanškroun, Czech Republic
Application/Limitation
When using the fused terminal block's type ZSI, the short-circuit breaking capacity of the fuse has to be
taken into consideration.
Operating instruction of the manufacturer to be observed
Type Approval documentation
As per tech.-docs. in NPS 262.1-011517-6/7
Tests carried out
IEC 60947-1:2004, IEC 60947-7-1:2002 and IEC 60695-2-1
Marking of product
Weidmüller – type destingnation – cross section – voltage – manufacturing site