Document of Conformity

Job Id: 262.1-032080-1

Certificate No: TAE00003TG

Form code: TA 251 Revision: 2016-12 www.dnvgl.com Page 2 of 2

Product description

WTR 2.5 24A 2.5mm² 500V

WTR 2.5/O.TNHE 24A 2.5mm² 500V

WTR 2.5 STB2.3 24A 2.5mm² 500V

WTR 2.5/O.TNHE STB2.3 24A 2.5mm² 500V

WTR 2.5 D- 2STB 6.9/2.3 1A 2.5mm² 500V

WTR 2.5 D+ 2STB 6.9/2.3 1A 2.5mm² 500V

Over voltage category III

Pollution degree 3

Material Wemid

Application/Limitation

Operating and installation instruction of the manufacturer to be observed.

Location Classes:

Temperature: B

Humidity: B

Vibration: B

Type Approval documentation

Test reports: LAB 14908 dated 2007

Dat Sheet/catalogue: 2014-10-21

Tests carried out

Applicable tests according to: DNVGL Class Guideline DNVGL-CG-0339, Edition November 2016

IEC 60947-7-1:2009

Marking of product

Manufacturer – Type designation – Main data

Periodical assessment

The scope of the periodical assessment is to verify that the conditions stipulated for the Type approval

are complied with and that no alterations are made to the product design or choice of materials.

The main elements of the assessment are:

• Inspection on factory samples, selected at random from the production line (where practicable).

• Results from Routine Tests (RT) checked (if not available tests according to RT to be carried out).

• Review of type approval documentation.

• Review of possible change in design, materials and performance.

• Ensuring traceability between manufacturer’s product type marking and Type Approval Certificate.

Periodical assessment is to be performed after 2 years and after 3.5 years. A renewal assessment will be

performed at renewal at renewal of the certificate.

END OF CERTIFICATE